top of page

Power & Energy Monitoring

What is Electrical Power & Energy Monitoring?

Load monitoring can be carried out for various reasons, such as looking at capacity of the installation for expansion, the current load draw, Load Balancing & assessing the power factor correction of the installation. 

Typically this service is carried out in large commercial installations, where by the electrical system is monitored using the latest monitoring equipment, to capture real time data of the installation.


This is carried out over a specified period of time to attain Max & Minimum values for the installation, a typical monitoring period is 7 days.

We provide a detailed report documentation which is possible to show all the following data of the installation. 

  • Current AC: up to 10kA 

  • Current DC: up to 5kA (Additional current clamp required to measure DC)

  • Voltage ratio / current ratio: up to 650 000V / 25 000A

  • Power Factor: from 10 W/var/VA to 10 GW/Gvar/GVA

  • Energy: up to 4EWh / 4 EVAh / 4 Evarh and total energy (4 quadrants)

  • Phase: cos φ, tan Φ, PF

  • Load Balancing Report

  • Harmonics: up to the 50th order

  • DC Network frequency: 50Hz, 60Hz and 400Hz

  • RMS and DC measurements with 128 samples/cycle simultaneously on each phase

  • Analogue measurements 

  • Crest factor

  • Total harmonic distortion calculation for currents and voltages

  • Breakdown in £ of energy losses 

If you're interested in learning more about electrical and energy monitoring systems, call today! We can help you choose the right system for your needs.

Speak with us today! - 0330 100 5341 or get an instant quote here.

power & energy logger
bottom of page